International Journal of Innovative Research in Computer and Communication Engineering

ISSN Approved Journal | Impact factor: 8.771 | ESTD: 2013 | Follows UGC CARE Journal Norms and Guidelines

| Monthly, Peer-Reviewed, Refereed, Scholarly, Multidisciplinary and Open Access Journal | High Impact Factor 8.771 (Calculated by Google Scholar and Semantic Scholar | AI-Powered Research Tool | Indexing in all Major Database & Metadata, Citation Generator | Digital Object Identifier (DOI) |


TITLE Sensor-Feedback Dust Removal and Remote Performance Tracking for Solar PV Panels Using Arduino and NodeMCU
ABSTRACT Dust accumulation lowers the output of solar photovoltaic (PV) panels, and manual cleaning is laborious. This paper presents an IoT-based system in which voltage and current sensors and an Arduino calculate panel power, a motor-driven brush removes dust, and a NodeMCU sends readings to a web dashboard. Rain, temperature and humidity sensing avoids unnecessary cleaning. The dashboard stored 766 records, showing about 12.12 V and 1.45 to 1.47 A (17.6 to 17.8 W) under clear, dry conditions. The system supports low-cost remote monitoring and maintenance.
AUTHOR V. PONNIYINSELVAN, G. SABARI, S. PERARASU, M. SANJAYRAJ, M. VELMURUGAN Professor, Department of Electronics and Communication Engineering, Mahendra College of Engineering, Salem, Tamil Nadu, India UG Students, Department of Electronics and Communication Engineering, Mahendra College of Engineering, Salem, Tamil Nadu, India
VOLUME 189
DOI DOI: 10.15680/IJIRCCE.2026.1410040
PDF pdf/40_Sensor-Feedback Dust Removal and Remote Performance Tracking for Solar PV Panels Using Arduino and NodeMCU.pdf
KEYWORDS
References 1. J. Gubbi, R. Buyya, S. Marusic, and M. Palaniswami, “Internet of Things (IoT): A vision, architectural elements, and future directions,” Future Generation Computer Systems, vol. 29, no. 7, pp. 1645–1660, Sep. 2013.
2. M. Mani and R. Pillai, “Impact of dust on solar photovoltaic (PV) performance: Research status, challenges and recommendations,” Renewable and Sustainable Energy Reviews, vol. 14, no. 9, pp. 3124–3131, Dec. 2010.
3. A. Rao, R. Pillai, M. Mani, and P. Ramamurthy, “Influence of dust deposition on photovoltaic panel performance,” in Proc. 4th Int. Conf. Advances in Energy Research (ICAER), Mumbai, India, Dec. 10–12, 2013.
4. K. Ilse, L. Micheli, B. W. Figgis, K. Lange, D. Daßler, H. Hanifi, F. Wolfertstetter, V. Naumann, C. Hagendorf, R. Gottschalg, and J. Bagdahn, “Techno-economic assessment of soiling losses and mitigation strategies for solar power generation,” Joule, vol. 3, no. 10, pp. 2303–2321, Oct. 2019.
5. G. Vedulla, A. Geetha, and R. Senthil, “Review of strategies to mitigate dust deposition on solar photovoltaic systems,” Energies, vol. 16, no. 1, p. 109, 2023.
6. M. J. Alshareef, “A comprehensive review of the soiling effects on PV module performance,” IEEE Access, vol. 11, pp. 134623–134651, 2023.
7. Y. Liu, H. Li, L. Li, X. Yin, X. Wu, Z. Su, F. Gao, B. Cai, et al., “Solar photovoltaic panel soiling accumulation and removal methods: A review,” IET Renewable Power Generation, Dec. 2024.
8. S. Dubey, J. N. Sarvaiya, and B. Seshadri, “Temperature dependent photovoltaic (PV) efficiency and its effect on PV production in the world – A review,” Energy Procedia, vol. 33, pp. 311–321, 2013.
9. E. Skoplaki and J. A. Palyvos, “On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations,” Solar Energy, vol. 83, no. 5, pp. 614–624, May 2009.
10. L. Atzori, A. Iera, and G. Morabito, “The Internet of Things: A survey,” Computer Networks, vol. 54, no. 15, pp. 2787–2805, Oct. 2010.
11. M. M. A. Shah, M. S. Parvez, A. Ahmed, and M. R. Hazari, “IoT based power monitoring of solar panel incorporating tracking system,” in Proc. 2021 Int. Conf. Automation, Control and Mechatronics for Industry 4.0 (ACMI), IEEE, 2021, pp. 1–4, doi: 10.1109/ACMI53878.2021.9528207.
12. Y. Begum, K. Yashaswini, G. Jahanavi, D. Dinesh, M. U. Reddy, and K. M. Vincent, “Smart dual-axis solar tracking system with weather monitoring and automated panel cleaning,” in Proc. 1st Int. Conf. Research and Development in Information, Communication, and Computing Technologies (ICRDICCT'25), SciTePress, 2025, pp. 53–61.
13. O. Olanrele, O. A. Adeaga, O. A. Adeyemi, O. K. Ajayi, and A. O. Mowemi, “An IoT based weather station using an embedded system,” Quantum Journal of Engineering, Science and Technology (QJOEST), vol. 3, no. 3, pp. 31–40, 2022.


Copyright © IJIRCCE 2020.All right reserved